

Coco Peat Bricks: Sizes, Expansion and How to Choose
A coco peat brick is the cheapest way to ship coir and the easiest to get wrong. Here is what the size, the compression and the spec sheet actually tell you before you order.
By Anthony Alexander, Regional Operations Head, Avee Cocoseller · Published November 2026


Short answer: a coco peat brick is coir pith (the fine, spongy part of the coconut husk) that has been washed, dried and pressed into a block. You add water and it expands several times over. The two sizes most buyers meet are the small 650 g brick, which makes about 9–10 litres, and the commercial 5 kg block, which makes about 70–75 litres. The size matters less than three things on the spec sheet: how clean it is (EC), how it was treated (washed and buffered), and how fine or coarse the material is.
You will see the same product sold as a coco peat brick, coir peat brick, coco coir brick or coco block. They all mean compressed coir pith. One name causes confusion: a plain “peat brick” can also mean compressed peat moss, which is a different material harvested from bogs. If a listing doesn’t say coir or coconut, ask.
Common brick and block sizes




| Format | Dry weight | Expanded volume | Water to hydrate | Who it suits |
|---|---|---|---|---|
| Small brick | About 650 g | About 9–10 litres | About 2.5–3 litres | Home growers, retail packs, small trials |
| Commercial block | 5 kg (± 0.3 kg) | About 70–75 litres | About 20 litres | Greenhouses, nurseries, mix blenders, distributors |
| Open-top bags and slabs | Varies | Fills its own bag | Hydrate in place | Growers who want to skip mixing; see coir grow bags |
Figures for the 5 kg block are from our own 5 kg coco peat block specification: 30 × 30 × 12 cm, a 5:1 compression ratio, EC below 0.5 mS/cm and pH 5.5–6.5. Other suppliers’ blocks will differ, so always plan from the expanded volume on the quote, not the weight.
How much does a coco peat brick expand?
Most of the volume in a brick is air that was pressed out. Add water and the pith opens back up. A 5 kg block at 5:1 compression gives roughly 70–75 litres of loose, damp medium, which is about the volume of a large storage tote. In practice:
- Water: about 4 litres per kilogram of brick, added a few litres at a time so the centre wets through.
- Time: the outside softens in around 10 minutes; a 5 kg block is usually ready in about an hour.
- Container: use something with room for the full expanded volume. A tight bucket squeezes the coir and leaves dry pockets.
Our step-by-step guide covers this in detail: how to hydrate a coco coir brick.
Brick, block or loose: which should you buy?
Compression is about freight. A shipping container of coir fills up by weight long before it runs out of space, so the more tightly the material is pressed, the less you pay to move each litre. That is why commercial buyers almost always buy 5 kg blocks rather than small bricks or loose bags.
- Choose small bricks if you sell to home gardeners or only need a few litres at a time.
- Choose 5 kg blocks if you fill containers, blend your own mixes or buy by the pallet. They cost less per litre to ship and store, and one block covers a lot of pots. To estimate how many you need, see how much coco coir do I need?
- Choose loose or pre-filled formats if labour is the bottleneck and you would rather pay more freight than spend time hydrating and mixing.
What to check on the spec sheet
Two bricks can look identical and behave very differently in the crop. Before you order by the pallet, ask for these in writing:
- EC and how it was measured. Low EC means less leftover salt. Many commercial growers look for below about 0.5 mS/cm, but extraction methods differ, so ask which one was used.
- Washed, buffered or both. Buffering with a calcium solution stops the coir pulling calcium and magnesium out of your feed in the first weeks. If you buy unbuffered, plan to buffer it yourself. See buffered vs unbuffered coco coir.
- Grade. Fine pith holds more water; coarser material and added husk chips hold more air. Match the grade to your crop and irrigation, and keep it the same from order to order. If you are unsure what you are being offered, read coco peat vs coco coir.
- Block weight tolerance and expanded volume. These decide your real cost per litre. A cheaper block that expands to less volume is not cheaper.
- Batch documentation. For commercial use, ask whether laboratory results are available for the batch you are buying, not just a typical figure.
Storing bricks before use
Dry, compressed coir stores well if it stays dry, covered and off the floor. Moisture during storage is the main thing to avoid. Our guide to storing coco coir blocks and grow bags covers the details.
Common questions
Is a coco peat brick the same as peat moss?
No. Coco peat comes from coconut husks, a by-product of the coconut industry. Peat moss is harvested from bogs. They are used in similar ways, which is why the names overlap, and coir is often chosen as a peat-free alternative. For a direct comparison see coco coir vs peat moss.
How many 5 kg blocks fit on a pallet?
On our export pallets, about 210 blocks per pallet and about 4,600 per 40 ft high-cube container. Pallet builds for local delivery can differ, so confirm the count on your quote. Our guide to importing coco coir covers container loads.
Do I need to add nutrients when I hydrate a brick?
Not to hydrate it. Plain water is enough. If the coir is sold washed and buffered, start your normal feed program at planting. If it is unbuffered, buffer it first.
Can I reuse coco peat after one crop?
Often, yes, depending on the crop and disease history. See how to reuse coco coir grow bags.
