

How to Choose Coco Coir Grow Bags for Greenhouse Strawberries
Test the bag on your own gutter before ordering for the whole house. Start with fit, plant spacing and how evenly the coir wets and drains.
By Anthony Alexander, Regional Operations Head, Avee Cocoseller · Published November 13, 2026


Canada harvested about 1.2 million square metres of greenhouse strawberries in 2025, up 45.5% from the year before. If you’re adding gutters or changing bags for the next crop, start with a short trial row before committing to a full order. Statistics Canada greenhouse survey
Choose the grow bag format for your strawberry system
For tabletop or hanging-gutter strawberries, compare long coco coir slabs by their expanded dimensions, planting positions and drainage layout. If your system uses individual containers, ask whether an open-top grow bag fits the support and gives you the root volume you need. For either format, measure the space available after hydration and check that you can inspect the drain outlets during the crop.
When comparing coco peat grow bags, ask how much of the blend is fine coir pith and how much is coarser material. Use that information to select samples for a trial, then check how each blend behaves with your drip irrigation and gutter setup. See Avee’s commercial coco coir grow bags for the formats you can discuss when requesting a quote.
Measure the gutter with the bag fully expanded
Measure the usable width between the gutter edges and note where the supports sit. Ask for the bag’s expanded length, width, height and volume. Set a hydrated sample on the gutter and check that it sits flat without the sides pinching the film or a support covering a drain opening. Measure the actual sample before approving the order.
Mark plant spacing before approving the hole layout
Mark the planting positions you already use on a test bag. Check that the plugs sit securely at the intended depth and each drip stake can reach without pulling the line. Ask for a drawing showing planting-hole spacing, hole size and drain positions. Two bags of the same length can have different usable planting space once you allow for the ends and the gap to the next bag.
Compare blends on a short trial row
If you’re comparing two blends, keep the bag dimensions, cultivar, planting date and emitter setup comparable. Follow the supplier’s hydration instructions for each bag. Check moisture at the ends and between emitters, and watch whether water backs up at the gutter outlet. If part of the row is drier, check dripper output and contact between the plug and coir before changing the blend. Record any irrigation adjustments so you can judge each bag under the conditions it actually received.
Ask for the quoted blend, buffering status, and applicable batch EC and pH results with the test method. Keep substrate test results and your own drain readings separate in the trial notes. They describe different measurements.
What to record before you scale up
| Check | Record on the trial row |
|---|---|
| Fit and spacing | Expanded bag dimensions, plant spacing, plug size and dripper reach |
| Wetting and drainage | Dry spots, pooling, blocked drains and any irrigation changes |
| Crop establishment | How evenly plants establish along the row and any persistent wet or dry spots |
| Ordering | Approved bag and hole layout, quantity, bags per pallet and required delivery date |
Use the approved drawing and trial notes when ordering coco coir for commercial strawberries. They give your crew a setup to repeat and give the supplier a specification to quote.
How many strawberry grow bags should you order?
Count the planting positions in each gutter and divide by the number of usable planting holes per bag. Round up for each gutter, then add your spare bags. For example, eight gutters with 120 positions each and six holes per bag would take 160 bags before spares, if the bag lengths and end clearances fit. Six holes is an example for the calculation. Use your approved spacing and bag drawing for the order.
What to compare in a wholesale strawberry grow-bag quote
Ask for expanded litres per bag, the planting and drain-hole drawing, bags per pallet, and delivery to the same postal or ZIP code. Compare delivered cost per usable planting position by dividing the total delivered price by the number of planting positions the bags will actually fill. Confirm whether freight and any unloading charges are included, and check the delivery date against your transplant schedule.
